HEM Proportional chlorine dosing unit21 April, 2022
HEM Type 9500/1350 Recirculation/High Flow21 April, 2022
HEM Hydrophore system
HEM Hydrophore systemComplete fresh water treatment solution
This new electronically controlled hydrophore system incorporates state-of-the-art frequency drives, pumps and control technology to provide responsive and reliable water distribution for yachts.
The use of variable frequency drives ensures smooth water pressure regulation, avoids any water hammer effects and greatly reduces the size of pressure reservoirs. Automatic rotation of lead pumps ensures even wear. In addition, several levels of redundancy ensure continuous system operation in the case of individual component failure.
HEM hydrophore systems always consist of a minimum of two independent pumps, each with its dedicated variable frequency drive. Each pump is rated to be able to handle 70-80% of the peak demand at the design pressure. This means that the system will operate comfortably with only one pump running for most daily usage, the second pump being used as an assist pump in peak periods.
Redundant pump sets
In a duplex system (two independent pump sets), the normal operating mode consists of a master pump and slave pump. The master pump controls the delivery pressure by varying the pump speed continuously according to a pressure feedback signal. The slave pump can be programmed as a fixed-speed assist pump or as a speed controlled pump with a pressure setpoint lower than the master pump. The frequency controllers are programmed in such a way that each one can take over the master function should one controller fail.
Redundant pressure sensors
Each variable frequency drive has a dedicated redundant pressure transducer circuit and can individually control the system in case of emergencies.
- Minimal space requirements.
- Easy installation – two hydraulic couplings and one electrical connection.
- Inlet and outlet manifolds permit left or right connections.
- Hydraulic assembly and all wetted pump parts are made from 316 stainless steel.
- Reliable multi-stage pumps with corrosion resistant bearing sleeves.
- System supplied as stand-alone or modular form for ease of installation.
|System||Hydro 227||Hydro 273||Hydro 285||Hydro 365||Hydro 385||Hydro 3168|
|Number of pumps||2||2||2||3||3||3|
|System nominalcapacity||3.Sm3/hr @ 7 bar||12m3/hr @ 3 bar||14m3/hr @ 7 bar||15m3/hr @ 5 bar||20m3/hr @ 5 bar||40m3/hr @ 8 bar|